April 2019 Monthly Madness Prize – Hollis F1 Fins
With a name Like F1 fins you would expect speed, efficiency and high-end performance – These fins deliver on all fronts!
The Hollis F1 fins are made from a single piece of high strength industrial monoprene rubber. Basically, that means with no seams, no plastic and no joins the Hollis F1 Fins are as tough as they come. For me that makes them perfect for almost any keen diver. Having a durable fin gives you confidence to take on even the toughest conditions from technical diving with multiple tanks to bashing them in and around rocks on a cray hunt!
Being made from a single piece of monoprene rubber gives the Hollis F1 fin a substantial weight. This makes it a great choice for divers wearing drysuits or 7mm wetsuits to help control the dreaded floaty foot syndrome. Because of this weight and strength of the fin the designers at Hollis have included three vents on the fin just past the tip of your toes. On any fin this zone at the very tip of your foot is a bit of a dead zone. Typically, that part of the fin offers nothing in terms of increased performance and simply makes it harder to kick. Having three vents here allows water in the dead zone to move through the fin and reduce your physical effort and increase efficiency
One of the things I love about using this fin is the massive increase in manoeuvrability I felt almost immediately. Down each side of the Hollis F1 Fin are big thick rails which add strength and rigidity to the blade thus improving performance. But a hidden gem about these rails is how much easier helicopter turns(turning on the spot) become.
(tning on the s
po
In the past using slimmer softer fins I struggled to turn on the sport without kicking up a wee cloud of silt but with a Technical fin like the F1 those big rails act almost like side panels and give you a much better surface to turn with. Using this style of fin, I can also finally back kick (move backwards) without flapping my arms around like an underwater chicken!
With all that strength and rigidity all moving through the water becomes a breeze.
The Hollis F1 fins are also much easier to get on and off compared to other fins I have used. To start with they have a stainless-steel spring strap which has three tensions setting to make sure you get a perfect fit. The beauty of a spring strap is that there is no more flopping and flailing about trying to get your rubber straps in place and secure. The F1 fins also have a thumb large thumb loop to make life easier pulling the strap into place. In terms of getting the fins off the F1 stands apart from others like it because of two seemingly insignificant drain holes in the foot pocket. These drain holes stop the fin from sucking onto your wetsuit boot so hard that you need to call on your buddy to yank them off.
All in all, I think the Hollis F1 fins are fantastic option for divers who are looking for a high-performance fin. The fins combine performance, ease of use, and power seamlessly to give divers a fin that will meet the even the most demanding of dive situations. It is an extremely well designed and well thought out fin – looks cool too!
http://www.aucklandscubadive.co.nz/products/265-f1-bat-fins
Spend $100 in store anytime during the month of April to go in to win this amazing prize!
*Terms and conditions apply